Australian Standard Temporary Safety Fencing AS 4687-2007 Exported to Australia

Frishine specializes in providing full range of temporary fencing that meets the strict international standards, and diverse needs of our clients. We export to Australia market high quality mesh fencing products meeting or exceeding Australian Standard.

Quality and Standards

Our temporary fencing materials are manufactured with the requirements of Australian Standard AS 4687-2007.

Australia Standard for temporary fencing used on construction sites and for public safety, involves specific guidelines to ensure that the fences are safe, durable, and effective. These standards are generally outlined under Australian Standards AS 4687-2007, which specifies the requirements for temporary fencing and hoardings. Key elements include:

1. Structural Integrity: The standard ensures that temporary fencing is capable of withstanding environmental forces such as wind. It specifies the methods for testing the stability and strength of the panels.
2. Material Requirements: Materials used in temporary fencing must be robust and durable. The panels are typically made from steel or other metals that are resistant to corrosion, often coated or galvanized to enhance durability.
3. Design and Construction: The fence design must prevent climbing and ensure that there are no protrusions or sharp edges that could cause injury. The design should also allow for easy installation and disassembly.
4. Height and Width: The standard temporary fence panels usually have a minimum height to ensure adequate barrier protection. Typical panel heights are around 2100mm with widths around 2400mm, sizes vary based on specific site requirements.
5. Footings and Stability: Temporary fences must be properly anchored, often using concrete blocks, sandbags, or other stabilizing methods to ensure they remain upright and secure under various conditions.
6. Access Control: Gates and access points within the temporary fencing must be secure but also allow for easy access when needed. Locks and latches should comply with safety standards to prevent unauthorized access.

Construction

The fence panels feature a frame constructed from 32mm O.D. pipes, providing a sturdy and flexible structure for the 4mm x 150mm x 60mm mesh infill. This construction not only ensures the strength and durability of the fence but also allows for versatility in fencing application.

Customized Specification

Our Australia standard temporary fencing is available in a variety of sizes and optional powder coated colors.

Accessories

We supply plastic feet and clamps for fence panel fixing and installing.

Fence panels with feet of orange rubber

Welded wire mesh panels hot-dipped galvanized, with frame pipe 32mm O.D., mesh 150mm x 60mm, meeting the Australian Standard with a 42-micron galvanized finish. Total weight: 24kg.

Temparary Fencing Mesh Panels Exported to Melbourne, Australia

The Order and Delivery: The order of full 40-foot container of temporary fence panels and accessories, destined for Melbourne, Australia.

Product Specifications:Australian Standard AS 4687-2007.

• Type (1) Fence Panels: 2100mm in height and 2400mm in length, plus 152mm posts on both upper and lower sides, frame pipe 2.0mm wall thickness and 32mm O.D. Welded mesh size 6.0mm x 50mm x 50mm, hot-dipped galvanised finish. Galvanised riveted clips.
• Type (2) Fence Panels: Panels with 2.5mm wall thickness 42mm O.D. pipes. The same mesh size and galvanisation.
• Type (3) Fence Panels: Framed mesh panel with 3.0mm wall thickness and 47mm O.D. pipes.

 

Hot dipped galvanized fence panels exported to Australia market, 2.1m high and 2.4m.